Engineered for demanding environments, this M16x17mm Nylon Hex Head Cap Screw offers superior corrosion resistance and electrical insulation. Its robust nylon construction ensures reliability in diverse industrial applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M16 |
| Length | 17mm |
| Head Width | 34mm |
A proven choice for industrial professionals, this M16x17mm Hex Head Cap Screw is manufactured from high-performance nylon, providing excellent dielectric strength, chemical resistance, and a lightweight profile. The M16 thread size ensures compatibility with standard M16 tapped holes, while the 17mm length is optimized for medium-thickness joint applications. The generous 34mm head width distributes load effectively, reducing stress on mating surfaces. Its non-magnetic properties make it ideal for sensitive electronic assemblies and environments where ferrous contamination is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating hole is clean and free of debris. 2. Thread the M16 Nylon Hex Head Cap Screw into the tapped hole by hand or with a suitable socket wrench. 3. Tighten the screw to the required torque, avoiding over-tightening which can strip the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening leading to thread stripping. | Use a torque wrench and adhere to recommended torque values for nylon fasteners to prevent damage. |
| Using in high-temperature or high-stress applications. | Verify the nylon material's temperature and load-bearing capabilities against application requirements. Consider alternative materials if specifications are exceeded. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment assembly, Chemical processing equipment, Light-duty structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||