Purpose-built for heavy-duty applications, this M16x112mm brass hex head cap screw offers superior corrosion resistance and excellent machinability. Its robust design ensures reliable fastening in demanding environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Size | M16 |
| Length | 112mm |
| Head Width | 23mm |
Purpose-built for heavy-duty applications, this M16x112mm brass hex head cap screw features a substantial 23mm head width, providing ample torque transfer and secure seating. Constructed from high-grade brass (typically UNS C36000 or equivalent), it exhibits exceptional resistance to corrosion, particularly in marine, chemical, and humid atmospheres, making it ideal for applications where galvanic corrosion is a concern. The material's inherent ductility and good thermal conductivity also contribute to its suitability in diverse industrial settings. Its imperial equivalent would approximate a 5/8" thread size with corresponding length and head dimensions, ensuring compatibility with standard tooling and fixtures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the cap screw to verify alignment and prevent cross-threading. 3. Tighten using an appropriate wrench or socket, applying torque gradually to the specified value for the application, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench, leading to head stripping. | Always use a correctly sized, high-quality hex socket or wrench that fits snugly on the hex head. |
| Over-tightening, which can deform the brass or damage the mating threads. | Refer to torque specifications for the specific application. If unknown, use moderate force and check for thread deformation. |
| Attempting to use in highly acidic or alkaline environments without verifying brass compatibility. | Consult chemical resistance charts for brass or consider alternative materials like stainless steel for extreme chemical exposure. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical connectors and enclosures, Plumbing and valve components, Architectural and decorative metalwork.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||