This M16 x 94mm Hex Head Cap Screw, constructed from high-strength Polycarbonate, offers exceptional corrosion resistance and non-conductive properties for demanding applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M16 |
| Length | 94mm |
| Head Width | 17mm |
Trusted by engineers across multiple sectors, this M16 x 94mm Hex Head Cap Screw features a 17mm head width. Fabricated from durable Polycarbonate, it exhibits superior resistance to a wide range of chemicals, including acids and alkalis, making it ideal for harsh environments where metal fasteners would corrode. Its excellent dielectric strength ensures electrical insulation, preventing short circuits in sensitive equipment. Furthermore, its lightweight nature contributes to reduced overall assembly weight without compromising structural integrity in moderate load applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Thread the M16 Polycarbonate Hex Head Cap Screw into the receiving component by hand for the initial turns to prevent cross-threading. 3. Using a wrench of appropriate size (17mm), tighten the screw until snug. Avoid overtightening to prevent stripping of the threads or damage to the polycarbonate material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the polycarbonate screw. | Apply only enough torque to secure the component firmly. Consult load charts if precise torque values are required, and use a torque-limiting wrench if necessary. |
| Using in applications exceeding the material's mechanical strength limits. | Verify that the tensile and shear strength of polycarbonate meets the application's load requirements. For high-stress applications, consider metal fasteners or consult an engineer. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Chemical processing equipment assembly, Electrical enclosures and housings, Medical device manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||