Engineered for demanding environments, this M16 x 90mm brass hex head cap screw offers superior corrosion resistance and non-magnetic properties. Its robust construction ensures reliable fastening in a variety of critical applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M16 |
| Length | 90mm |
| Head Width | 9mm |
Purpose-built for heavy-duty applications, this M16 x 90mm brass hex head cap screw features a nominal diameter of M16 and a length of 90mm, with a head width of 9mm for substantial torque application. Manufactured from high-grade brass (typically UNS C36000 or equivalent), it exhibits excellent resistance to corrosion, particularly in marine and chemical environments, and is inherently non-magnetic, making it suitable for electrical applications where ferrous materials are undesirable. The brass material provides good tensile strength for its class and a pleasing aesthetic for exposed components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket to fit the 9mm hex head. 2. Ensure the mating threads are clean and free of debris. 3. Insert the screw into the pre-drilled or tapped hole. 4. Tighten the screw to the required torque specification, avoiding overtightening to prevent thread stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a wrench that does not properly fit the hex head, leading to stripping. | Always use a properly sized socket or wrench that fully engages with the hex head to ensure even torque distribution and prevent damage. |
| Applying excessive force, causing the brass threads to strip or the screw to break. | Refer to torque charts for brass fasteners or apply moderate, consistent torque. Brass is softer than steel, requiring a more delicate approach to tightening. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical grounding and bonding components, Decorative architectural elements, Chemical processing equipment, Food processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||