Engineered from aerospace-grade Titanium Grade 5, this M16 x 57mm hex cap screw delivers exceptional strength-to-weight ratio and superior corrosion resistance. Ideal for critical applications requiring reliability and longevity.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M16 |
| Length | 57mm |
| Head Width | 26mm |
Precision-manufactured to tight tolerances, this M16 x 57mm hex head cap screw utilizes Titanium Grade 5 (Ti-6Al-4V) alloy, renowned for its excellent tensile strength (950 MPa minimum), high fatigue strength, and remarkable corrosion resistance in aggressive environments. The 26mm hex head provides ample surface area for torque application with standard tooling. Its biocompatibility makes it suitable for medical implants and devices. Operating temperature range of -200°C to +400°C.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Apply a suitable lubricant or anti-seize compound to the threads, especially for dissimilar materials or high-torque applications. 3. Tighten the M16 x 57mm hex cap screw to the specified torque using calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, leading to thread stripping or component damage. | Always adhere to the recommended torque specifications for the application and mating materials. |
| Using standard steel tools that can gall or damage the softer titanium threads. | Utilize high-quality, properly sized tools made from hardened steel or carbide to prevent galling. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and offshore equipment, Medical implants and surgical instruments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||