Engineered for superior performance, this M16 x 55mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric properties. Ideal for environments where metallic fasteners are unsuitable.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M16 |
| Length | 55mm |
| Head Width | 26mm |
Specified by design engineers worldwide, this M16 x 55mm Nylon Hex Head Cap Screw boasts a nominal diameter of M16 and a length of 55mm. The hex head provides a 26mm width for secure torque application with standard tooling. Constructed from high-grade nylon, it exhibits excellent tensile strength, resistance to a broad spectrum of chemicals, and non-magnetic properties. Its inherent dielectric strength makes it perfect for electrical insulation and environments prone to galvanic corrosion, ensuring long-term reliability in demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate socket or wrench for the 26mm hex head. 2. Thread the M16 cap screw into the mating component, ensuring smooth engagement. 3. Apply torque according to design specifications, avoiding over-tightening to prevent stripping or material damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque, leading to thread stripping or head damage. | Always adhere to the torque specifications outlined in the design documentation. Utilize a calibrated torque wrench for precision. |
| Incorrect tool selection for the hex head, causing cam-out and potential damage. | Ensure the correct size socket or wrench (26mm) is used to achieve a full engagement with the hex head. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosure assembly, Corrosion-sensitive processing equipment, Medical device manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||