This M16 x 53mm brass hex head cap screw offers superior corrosion resistance and non-magnetic properties. Its bright, aesthetically pleasing finish makes it ideal for both functional and decorative industrial applications requiring durability and conductivity.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M16 |
| Length | 53mm |
| Head Width | 18mm |
A high-performance industrial component, this M16 x 53mm hex head cap screw is precision manufactured from solid brass, offering excellent corrosion resistance, especially in marine and humid environments. The material's inherent non-magnetic nature and good electrical conductivity make it suitable for sensitive electronic assemblies and environments prone to magnetic interference. With a nominal diameter of M16, a length of 53mm, and a head width of 18mm, it conforms to industry standards for reliable and secure fastening. Its malleability allows for moderate torque applications without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating thread is clean and free from debris. 2. Align the cap screw with the threaded hole and begin hand-tightening to prevent cross-threading. 3. Utilize a calibrated torque wrench to tighten the screw to the specified torque value for the M16 size and application, ensuring even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the brass screw, which can strip the threads or deform the component. | Always use a torque wrench set to the recommended torque for M16 brass fasteners and the specific application. |
| Using steel tools on brass, which can cause galling or damage to the screw head. | Employ appropriate brass or plated tools to avoid damaging the hex head. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical and electronic enclosures, Architectural and decorative metalwork, Plumbing and pipe joining.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||