This M16 x 45mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and non-conductive properties. Its lightweight yet robust design makes it ideal for specialized industrial fastening needs.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M16 |
| Length | 45mm |
| Head Width | 14mm |
A high-performance industrial component, this M16 x 45mm Nylon Hex Head Cap Screw is engineered for applications demanding chemical inertness and electrical insulation. The dimensions, including a 14mm head width, ensure compatibility with standard tooling. Constructed from high-grade nylon, it exhibits excellent tensile strength for its weight, superior vibration dampening, and resistance to a wide range of solvents and acids. This makes it a preferred choice for environments where metal fasteners would degrade or pose an electrical hazard.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-thread the cap screw to engage initial threads. 3. Tighten using an appropriate wrench or socket, applying torque within the nylon material's recommended limits to avoid stripping or deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or head deformation. | Adhere to the specified torque recommendations for nylon fasteners. Use a torque wrench if precision is critical. |
| Using the nylon screw in an application exceeding its temperature or load-bearing capacity. | Consult the material's datasheet for temperature and tensile strength limits. Select the appropriate fastener material for the operational environment. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment, Electrical enclosures and insulation, Medical device assembly.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||