This M16 x 44mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and a lightweight profile. Engineered for precision, it ensures reliable fastening in diverse environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M16 |
| Length | 44mm |
| Head Width | 10mm |
Precision-manufactured to tight tolerances, this M16 x 44mm Nylon Hex Head Cap Screw features a nominal diameter of M16, a length of 44mm, and a head width of 10mm. Constructed from high-grade nylon, it provides excellent dielectric strength, resistance to a wide range of chemicals, and a lower coefficient of friction compared to metallic fasteners. Its inherent non-magnetic properties and lightweight nature make it ideal for applications where galvanic corrosion, weight reduction, or electrical insulation are critical considerations. The hex head design allows for secure tightening with standard tools, ensuring consistent clamp loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the screw to engage initial threads. 3. Tighten with an appropriate hex wrench to the specified torque, avoiding overtightening to prevent thread stripping or head deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw. | Use a torque wrench and adhere to recommended torque values to prevent stripping or damaging the fastener. |
| Using the wrong size hex wrench. | Verify the hex wrench size matches the 10mm head width precisely to ensure proper engagement and prevent cam-out. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation applications, Corrosion-prone environments (marine, chemical processing), Lightweight assembly requirements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||