This M16 x 36mm hex head cap screw is engineered from robust carbon steel, offering superior strength and durability for critical industrial assemblies. Its precise dimensions ensure reliable performance in demanding environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Size | M16 |
| Length | 36mm |
| Head Width | 27mm |
A high-performance industrial component, this M16 x 36mm hex head cap screw is manufactured from high-grade carbon steel, selected for its excellent tensile strength and shear resistance. The M16 thread size signifies a nominal major diameter of 16mm, with a standard coarse pitch for robust engagement. The 36mm length provides ample grip for secure fastening in a variety of joint thicknesses. The 27mm hexagonal head width allows for effective torque application using standard tooling, ensuring consistent and secure tightening. This material grade is suitable for a wide range of structural and mechanical applications where load-bearing capacity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces and threads of both the screw and the receiving hole. 2. Insert the cap screw through the assembled components. 3. Tighten the cap screw to the specified torque using an appropriately sized wrench or socket, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a screw of incorrect length, leading to insufficient thread engagement or interference. | Always verify the required screw length for the specific joint thickness and ensure it provides at least 1.5 to 2 full thread engagements. |
| Over-tightening the screw, which can strip threads or cause material deformation. | Utilize a torque wrench set to the manufacturer's recommended torque value for the screw size and material. |
A: This Hex Head Cap Screw, Carbon Steel is manufactured from Carbon Steel.
A: Heavy Machinery Assembly, Structural Steel Construction, Automotive Chassis Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||