Engineered for high-performance assembly, this M16 x 17mm Hex Head Cap Screw from Aluminum 6061 offers exceptional strength-to-weight ratio and superior corrosion resistance for critical applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Size | M16 |
| Length | 17mm |
| Head Width | 8mm |
Built to exacting engineering tolerances, this M16 x 17mm Aluminum 6061 Hex Head Cap Screw features a nominal diameter of M16 and a grip length of 17mm. The head exhibits a hex width of 8mm, ensuring reliable torque transfer with standard tooling. Fabricated from Aluminum Alloy 6061-T6, it provides a robust combination of moderate to high strength, excellent corrosion resistance, and good formability. This material's inherent lightweight properties make it ideal for aerospace, automotive, and marine environments where weight reduction is paramount without compromising structural integrity. The precise dimensions guarantee secure and repeatable fastenings in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate torque wrench and socket size for the M16 hex head. 2. Ensure the mating threads are clean and free from debris or damage. 3. Apply the specified torque to the cap screw, ensuring even tightening across multiple fasteners if used in a pattern.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening Aluminum 6061 screws, leading to stripped threads or material deformation. | Adhere to the recommended torque specifications for Aluminum 6061 fasteners to prevent damage and ensure joint integrity. |
| Using the wrong size socket, resulting in cam-out and damage to the hex head. | Always use a properly sized and well-fitting socket for the 8mm hex head to ensure positive engagement and prevent slippage. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive interior and exterior trim, Marine hardware and fittings, Lightweight machinery and equipment frames.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||