This M16 x 150mm Hex Head Cap Screw is precision-engineered from high-strength Aluminum 6061. Offering excellent corrosion resistance and a lightweight profile, it's ideal for demanding structural and assembly applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Size | M16 |
| Length | 150mm |
| Head Width | 31mm |
Built to exacting engineering tolerances, this M16 x 150mm Hex Head Cap Screw features a nominal diameter of 16mm and a thread pitch of 2mm (standard metric coarse). The head width is precisely machined to 31mm, ensuring compatibility with standard M16 tooling. Fabricated from Aluminum 6061-T6, it boasts a minimum tensile strength of 310 MPa and a yield strength of 276 MPa, combined with excellent corrosion resistance and a density of approximately 2.7 g/cm³. Its alloy composition provides a favorable strength-to-weight ratio, making it suitable for applications where weight reduction is critical without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Thread the M16 x 150mm cap screw by hand to confirm proper engagement. 3. Tighten using a calibrated torque wrench to the manufacturer's recommended torque specification for Aluminum 6061 fasteners to avoid over-stressing the material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque on Aluminum 6061 fasteners, leading to thread stripping or yielding. | Always consult the fastener's datasheet or a reliable engineering guide for the correct torque values, and utilize a calibrated torque wrench for precise application. |
| Improperly cleaning mating surfaces, which can introduce contaminants and affect thread engagement and clamping force. | Thoroughly clean both the screw threads and the tapped hole or nut using a suitable solvent to remove any dirt, grease, or debris before assembly. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine equipment assemblies, Lightweight automotive applications, General industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||