Engineered for demanding environments, this M16 x 13mm hex head cap screw is crafted from premium Titanium Grade 5. It offers superior strength-to-weight ratio and exceptional corrosion resistance.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M16 |
| Length | 13mm |
| Head Width | 12mm |
Built to exacting engineering tolerances, this M16 x 13mm hex head cap screw features a nominal diameter of M16, an overall length of 13mm, and a head width of 12mm. Composed of Titanium Grade 5 alloy (Ti-6Al-4V), it exhibits exceptional tensile strength (up to 130,000 psi), high fatigue resistance, and superior corrosion immunity in aggressive media, including saltwater and chlorides. Its low density (approximately 4.43 g/cm³) makes it ideal for weight-sensitive applications where performance cannot be compromised. Standard thread pitch applies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the screw to confirm proper engagement and prevent cross-threading. 3. Tighten using an appropriate wrench or socket to the specified torque value, taking care not to overtighten.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Cross-threading the fastener by forcing it into the receiving threads. | Always start by hand-threading the screw to ensure it engages correctly before applying torque. |
| Using excessive torque, which can strip threads or damage the fastener. | Consult torque specifications for Titanium Grade 5 fasteners for the specific application and use a calibrated torque wrench. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and subsea equipment, Medical implants and surgical instruments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||