This M16 x 134mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric properties. Its lightweight design and robust construction ensure reliable fastening in diverse environments, particularly where chemical exposure or electrical conductivity is a concern.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M16 |
| Length | 134mm |
| Head Width | 20mm |
Engineered for reliability and performance, this M16 Hex Head Cap Screw is fabricated from high-strength Nylon, offering superior chemical resistance to solvents, oils, and many acids, along with excellent dielectric strength. The M16 thread size and 134mm length provide substantial structural integrity for secure joining. Its 20mm head width ensures adequate torque application with standard tooling. Ideal for applications in corrosive chemical processing, electronics assembly, medical equipment, and automotive components where weight reduction and non-conductivity are critical requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the Nylon Hex Head Cap Screw into the receiving component to prevent cross-threading. 3. Tighten using a standard wrench or socket, applying torque gradually until snug. Avoid overtightening to prevent stripping or damaging the Nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the Nylon screw, leading to thread stripping. | Apply consistent, moderate torque. Use a torque wrench if precise control is required, and consult manufacturer specifications for recommended torque values for Nylon fasteners. |
| Using metal tools that can damage the Nylon head or threads. | Utilize tools specifically designed for plastic fasteners or ensure metal tools have smooth, rounded edges to minimize surface damage. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment, Electrical enclosures and components, Medical device assembly, Lightweight automotive applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||