This M16 x 117mm Hex Head Cap Screw is engineered from advanced polycarbonate, offering exceptional impact strength, chemical resistance, and non-conductivity for critical fastening needs.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Size | M16 |
| Length | 117mm |
| Head Width | 30mm |
A high-performance industrial component, this M16 x 117mm Hex Head Cap Screw boasts a robust polycarbonate construction, providing superior tensile strength and a broad operating temperature range. Its inherent dielectric properties make it ideal for environments where electrical conductivity is a concern. The 30mm head width ensures ample torque application. Polycarbonate's excellent resistance to many acids, bases, and solvents further enhances its suitability for corrosive or chemically active applications, outperforming traditional metal fasteners in specific scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure threads are clean and free from debris. 2. Hand-thread the cap screw to verify alignment and prevent cross-threading. 3. Tighten using an appropriate wrench to the recommended torque specification, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw, which can lead to thread stripping or material deformation. | Use a torque wrench and adhere to the manufacturer's recommended torque values for polycarbonate fasteners. |
| Using the wrong tool, potentially damaging the hex head. | Utilize a correctly sized socket or wrench specifically designed for hex heads. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and equipment mounting, Corrosive chemical processing environments, Medical device assembly.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||