Engineered for demanding applications, this M16 x 114mm hex head cap screw is fabricated from high-performance polycarbonate. Offers superior impact resistance and non-conductive properties.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Size | M16 |
| Length | 114mm |
| Head Width | 32mm |
Specified by design engineers worldwide, this M16 x 114mm polycarbonate hex head cap screw offers exceptional durability and chemical resistance. The material's high impact strength makes it ideal for environments prone to shock or vibration. With a head width of 32mm, it provides ample bearing surface for secure fastening. Polycarbonate's inherent non-conductive nature is critical in electrical or sensitive electronic assemblies, preventing short circuits and ensuring operational integrity. Its lightweight profile also contributes to reduced overall assembly weight.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the screw initially to verify alignment and prevent cross-threading. 3. Use an appropriate hex driver to tighten the screw to the specified torque, avoiding over-tightening which can stress the polycarbonate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, leading to thread stripping or material fracture. | Adhere to manufacturer-recommended torque specifications or use a calibrated torque wrench. For polycarbonate, lower torque values than typically used for metal fasteners are often sufficient. |
| Using the screw in applications exceeding its temperature or chemical resistance range. | Consult the polycarbonate material datasheet for its operational temperature limits and chemical compatibility. Select fasteners appropriate for the specific environmental conditions. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and equipment mounting, Medical device assemblies, Food processing machinery components, Automotive interior trim and components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||