This M16 x 110mm Hex Head Cap Screw, constructed from robust Polycarbonate, offers exceptional strength and chemical resistance. Ideal for environments where traditional metal fasteners are unsuitable.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M16 |
| Length | 110mm |
| Head Width | 33mm |
Designed for demanding industrial environments, this M16 x 110mm Hex Head Cap Screw features a substantial 33mm head width for superior torque application and load distribution. Manufactured from high-performance Polycarbonate, it exhibits excellent resistance to a broad spectrum of chemicals, including acids, alkalis, and solvents, making it suitable for corrosive atmospheres. Its non-conductive properties also provide critical electrical isolation, vital for sensitive equipment and hazardous environments. The thread pitch adheres to ISO standards, ensuring compatibility with standard M16 components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the screw into the receiving component until snug. 3. Tighten using an appropriate wrench on the hex head, applying torque gradually and avoiding over-tightening. Refer to torque specifications if available.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque leading to material deformation. | Adhere to recommended torque values for Polycarbonate fasteners. If unknown, apply moderate force and check for secure engagement without stripping or cracking. |
| Cross-threading the screw during installation. | Carefully align the screw with the mating threads and ensure it starts easily by hand before applying any tools. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Chemical processing equipment assembly, Electrical enclosure fastening, Medical device manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||