This M16 x 110mm brass hex head cap screw offers exceptional corrosion resistance, making it ideal for environments prone to moisture and chemical exposure. Its durable brass construction ensures longevity and a clean aesthetic.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M16 |
| Length | 110mm |
| Head Width | 17mm |
Manufactured under strict quality controls, this M16 x 110mm hex head cap screw features a nominal diameter of M16 and a total length of 110mm. The head width is precisely 17mm, ensuring compatibility with standard M16 hex wrenches. Constructed from high-grade brass (typically UNS C36000 or equivalent), it exhibits excellent machinability, good strength, and superior resistance to tarnishing and corrosion, particularly in marine, electrical, and decorative assemblies. The material's inherent non-magnetic properties are also advantageous in specific applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M16 hex wrench. 2. Thread the cap screw into the pre-tapped hole or mating fastener. 3. Tighten to the required torque, ensuring not to overtighten to prevent stripping or material damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size hex wrench, leading to stripped head damage. | Always use the specified M16 hex wrench (17mm head width) for proper engagement and torque application. |
| Overtightening, which can damage the brass threads or the mating component. | Apply torque gradually and stop once snug plus the required rotational turn, or consult torque specifications for brass fasteners if available. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical connectors and enclosures, Decorative architectural elements, Plumbing and HVAC systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||