This M16 x 109mm Nylon Hex Head Cap Screw offers superior corrosion resistance and dielectric properties. Its robust nylon construction ensures reliable performance in harsh environments where metal fasteners would degrade.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M16 |
| Length | 109mm |
| Head Width | 31mm |
Built to exacting engineering tolerances, this M16 x 109mm Nylon Hex Head Cap Screw (Head Width: 31mm) is manufactured from high-performance, engineering-grade nylon. This material provides exceptional resistance to a wide range of chemicals, solvents, and moisture, making it ideal for corrosive environments. Its inherent dielectric strength offers electrical insulation benefits, crucial for applications involving conductive materials. The hex head design allows for secure tightening with standard tooling, ensuring consistent and reliable joint integrity. This fastener is designed for applications requiring a lightweight, non-magnetic, and non-sparking solution.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Align the M16 Nylon Hex Head Cap Screw with the threaded hole or nut. 3. Tighten the screw using a suitable wrench or socket, applying torque gradually until secure. Avoid overtightening to prevent thread stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, which can strip threads or crush the material. | Apply moderate torque and stop when the screw is snug and the joint is secure. Consult torque charts for nylon fasteners if available. |
| Using metal tools that can damage the nylon head or threads. | Use nylon-compatible tools or ensure metal tools are properly fitted and used with care to avoid excessive force or slippage. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment, Marine and offshore installations, Electrical enclosure assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||