Engineered for superior tensile strength and corrosion resistance, this M16 x 105mm 304 Stainless Steel Hex Cap Screw offers reliable fastening in harsh environments. Its robust design ensures secure connections for critical assemblies.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M16 |
| Length | 105mm |
| Head Width | 26mm |
Built to exacting engineering tolerances, this M16 x 105mm hex head cap screw is manufactured from premium 304 stainless steel, renowned for its excellent corrosion resistance and moderate tensile strength. The M16 nominal diameter ensures substantial load-bearing capacity, complemented by a 105mm length for versatile application in thicker materials or where extended reach is required. The 26mm head width provides ample surface area for torque application via a standard wrench or socket, facilitating secure tightening and preventing galling. This grade of stainless steel offers good performance in a wide range of temperatures and is non-magnetic, making it suitable for environments prone to chemical exposure or requiring electrical non-conductivity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate torque wrench and socket size (26mm). 2. Ensure the mating threads are clean and free from debris. 3. Insert the screw and engage threads for at least two full turns before applying torque. 4. Tighten to the specified torque value for the application, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size socket, leading to stripping the hex head. | Always use a correctly sized 26mm socket to ensure proper engagement and prevent damage to the screw head. |
| Cross-threading the screw, damaging both the screw and the mating component. | Start threading by hand for at least two full rotations to confirm proper alignment before applying any tool. |
| Overtightening, which can lead to thread deformation or material failure. | Refer to application-specific torque charts or consult with a structural engineer to determine the correct tightening torque. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Structural steel connections, Marine and offshore equipment, Chemical processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||