Engineered for resilience, this M16 x 100mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and electrical insulation. Its robust nylon construction ensures performance in challenging industrial applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M16 |
| Length | 100mm |
| Head Width | 28mm |
Designed for demanding industrial environments, this M16 x 100mm Hex Head Cap Screw is manufactured from high-grade nylon, providing superior resistance to chemicals, solvents, and moisture. The material's inherent dielectric properties make it ideal for electrical applications where conductivity must be avoided. With a head width of 28mm and a length of 100mm, it offers substantial engagement and clamping force. This fastener is engineered for applications requiring a lightweight, non-magnetic, and non-corrosive solution, such as in food processing, water treatment, and electronic assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Insert the M16 Nylon Hex Head Cap Screw into the designated hole. 3. Tighten the screw using an appropriate wrench until snug, avoiding over-tightening to prevent thread stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M16 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M16 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can strip threads or crack the head. | Use a torque wrench set to the manufacturer's recommended torque specification for nylon fasteners, or tighten until snug without excessive force. |
| Using the nylon screw in applications with excessive heat or mechanical stress beyond its rated capacity. | Consult the material's technical data sheet to confirm suitability for the specific operating temperature and load requirements. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical Enclosures and Assemblies, Chemical Processing Equipment, Water and Wastewater Treatment Systems, Food and Beverage Processing Lines, Corrosive Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||