This M15 x 87mm Hex Head Cap Screw, crafted from high-strength Aluminum 6061, offers superior corrosion resistance and excellent machinability. Its robust design ensures reliable fastening in demanding environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M15 |
| Length | 87mm |
| Head Width | 13mm |
Engineered for reliability and performance, this M15 x 87mm Hex Head Cap Screw features a nominal thread diameter of 15mm and an overall length of 87mm, with a precisely manufactured head width of 13mm for standard tool engagement. Constructed from Aluminum 6061-T6, it provides an exceptional strength-to-weight ratio, excellent corrosion resistance, and good formability, making it ideal for applications where weight reduction is critical, such as aerospace, automotive components, and marine hardware. This alloy offers good weldability and is suitable for moderate loads and environments where galvanic corrosion is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Insert the Hex Head Cap Screw and thread it by hand for at least two full turns to prevent cross-threading. 3. Tighten the screw using a calibrated torque wrench to the recommended torque specification for Aluminum 6061, considering the application's load requirements and safety factors.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M15 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M15 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, which can strip threads or damage the aluminum material. | Always use a calibrated torque wrench and adhere to the recommended torque values for the specific application and material. |
| Using steel tools that can scratch or damage the anodized or natural finish of the aluminum screw. | Utilize tools made of softer materials or ensure tools are clean and free of steel debris before use. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Lightweight structural assemblies, Automotive chassis components, Marine and aerospace fixtures, Electronic enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||