Engineered from aerospace-grade Titanium Grade 5, this M15x47mm hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance for critical fastening applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M15 |
| Length | 47mm |
| Head Width | 9mm |
Manufactured under strict quality controls, this M15x47mm hex head cap screw boasts a nominal diameter of M15, a length of 47mm, and a head width of 9mm. Constructed from Titanium Grade 5 (Ti-6Al-4V), it exhibits outstanding tensile strength, fatigue resistance, and excellent performance in extreme temperature environments. This material's inherent biocompatibility and non-magnetic properties make it suitable for specialized applications where galvanic corrosion or magnetic interference is a concern. Designed to meet rigorous industrial standards for reliability and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply appropriate lubricant if required by the application. 3. Tighten screw to the specified torque using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M15 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M15 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening leading to thread stripping or fastener fracture. | Always adhere to manufacturer-specified torque values and use a calibrated torque wrench. |
| Using incompatible lubricants that can cause hydrogen embrittlement in titanium. | Consult material compatibility charts and use lubricants specifically approved for titanium fasteners. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace and Aviation components, Medical implants and surgical instruments, Marine and offshore equipment, High-performance automotive assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||