Engineered from high-performance nylon, this M15x35mm hex head cap screw offers exceptional corrosion resistance and electrical insulation. Its robust design and precise dimensions ensure reliable fastening in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M15 |
| Length | 35mm |
| Head Width | 21mm |
Manufactured under strict quality controls, this M15x35mm Nylon Hex Head Cap Screw features a nominal diameter of M15 and a length of 35mm. The head exhibits a width of 21mm, providing ample bearing surface. Composed of durable, injection-molded nylon, it boasts superior chemical resistance to common solvents and acids, low friction for easy assembly, and excellent dielectric properties, making it ideal for environments where electrical conductivity is a concern. Its lightweight nature contributes to reduced overall assembly weight.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating nut or pre-tapped hole for the M15 thread. 2. Hand-thread the cap screw into the receiving component to ensure proper alignment and prevent cross-threading. 3. Use a standard hex driver or wrench to tighten the cap screw to the required torque, avoiding overtightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M15 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M15 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, leading to thread stripping or head deformation. | Tighten to the manufacturer's recommended torque or until snug, then an additional 1/8 to 1/4 turn. Consider using a torque wrench for critical applications. |
| Using the screw in an application exceeding its temperature or load-bearing capacity. | Consult the nylon material's datasheet for specific temperature limits and load ratings. Select fasteners appropriate for the operational environment. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Medical equipment assembly, Corrosive chemical processing environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||