This M15 x 87mm Nylon Hex Head Cap Screw offers exceptional strength and corrosion resistance. Its lightweight, non-conductive properties make it ideal for specialized industrial applications requiring durability and safety.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M15 |
| Length | 87mm |
| Head Width | 24mm |
Engineered for reliability and performance, this M15 x 87mm Hex Head Cap Screw is manufactured from high-grade Nylon, providing superior chemical resistance, excellent dielectric strength, and a high strength-to-weight ratio. The M15 thread size ensures robust engagement, while the 87mm length offers ample reach for various assembly requirements. The 24mm head width allows for secure tightening with standard tooling, making it suitable for applications in corrosive environments, electrical insulation, and weight-sensitive assemblies where traditional metal fasteners would degrade or be unsuitable.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Insert the Nylon Hex Head Cap Screw into the pre-drilled hole or mating component. 3. Tighten the screw using an appropriate hex driver or wrench, applying consistent torque until snug. Avoid over-tightening to prevent thread stripping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M15 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M15 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the Nylon screw, which can lead to thread stripping or material deformation. | Use a torque wrench to apply the recommended torque specification for Nylon fasteners. Stop tightening once the screw is snug and provides sufficient clamping force. |
| Using the wrong size or type of tool for tightening, potentially damaging the hex head. | Always use a properly fitting hex driver or wrench that matches the 24mm head width to ensure even pressure distribution and prevent cam-out. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical Processing Equipment, Electrical Enclosures and Assemblies, Marine and Coastal Applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||