This M15 x 87mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric strength. Ideal for demanding environments where traditional metal fasteners are unsuitable.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M15 |
| Length | 87mm |
| Head Width | 19mm |
Precision-manufactured to tight tolerances, this M15 x 87mm hex head cap screw features a nominal diameter of 15mm and an overall length of 87mm. The head boasts a 19mm width for standard wrenching. Constructed from high-grade nylon, it exhibits excellent chemical resistance to many solvents, oils, and acids, making it suitable for corrosive environments. Its inherent non-conductive properties also provide superior electrical insulation. The material offers a favorable strength-to-weight ratio, reducing overall assembly mass. Recommended operating temperature range is -40°C to 100°C.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the screw to engage initial threads to prevent cross-threading. 3. Tighten using a standard wrench on the hex head to the specified torque, avoiding over-tightening which can strip nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M15 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M15 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw. | Use a torque wrench set to the manufacturer's recommended torque for nylon fasteners to prevent thread stripping. |
| Using in applications exceeding the recommended temperature range. | Verify the operating temperature of the application falls within the nylon screw's specified range (-40°C to 100°C). |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and components, Chemical processing equipment, Food and beverage machinery, Marine environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||