This M15 x 62mm Nylon Hex Head Cap Screw offers superior corrosion resistance and electrical insulation. Its lightweight yet robust nylon construction makes it ideal for applications where chemical exposure or conductivity is a concern.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M15 |
| Length | 62mm |
| Head Width | 17mm |
A high-performance industrial component, this M15 x 62mm Nylon Hex Head Cap Screw features a precisely engineered M15 thread size, a 62mm nominal length, and a 17mm head width for optimal torque transfer. Constructed from high-grade Nylon (Polyamide), it exhibits excellent resistance to a wide range of chemicals, solvents, and moisture, preventing galvanic corrosion common in metallic fasteners. Its inherent dielectric properties make it suitable for electrical insulation in sensitive environments. The hex head design ensures reliable fastening with standard tools. The material's low coefficient of friction also facilitates smooth assembly and disassembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-tighten the screw to engage threads properly, then use a suitable wrench or socket to turn the hex head. 3. Tighten to the required torque specification, avoiding over-tightening which can strip threads or damage the nylon material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M15 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M15 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or material deformation. | Use a torque wrench and adhere to recommended torque values for nylon fasteners to prevent damage. |
| Using the screw in applications exceeding its temperature or load-bearing limits. | Consult the material's technical data sheet for specific temperature and tensile strength limitations before deployment. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical and electronic equipment assembly, Chemical processing equipment, Corrosion-sensitive environments, Lightweight structural fastening.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||