Engineered from robust nylon, this M15 x 44mm hex head cap screw offers superior corrosion resistance and electrical insulation. Its 28mm head width ensures reliable torque transfer for demanding applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M15 |
| Length | 44mm |
| Head Width | 28mm |
Built to exacting engineering tolerances, this M15 x 44mm Nylon Hex Head Cap Screw features a substantial 28mm hex head for positive wrench engagement. Crafted from high-performance nylon, it exhibits excellent resistance to a broad spectrum of chemicals, moisture, and environmental degradation, making it ideal for applications where galvanic corrosion or electrical conductivity is a concern. Its inherent dielectric properties also make it suitable for use in electrical assemblies or areas requiring non-conductive materials. The precise dimensions ensure consistent performance and secure fastening in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket for the 28mm hex head. 2. Align the M15 thread with the receiving fastener hole. 3. Apply steady, even torque until the desired tightness is achieved, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M15 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M15 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can lead to thread stripping or cracking of the head. | Use a torque wrench and adhere to recommended torque values for nylon fasteners, or tighten until snug with moderate force. |
| Using a wrench or socket that does not properly fit the 28mm hex head, potentially rounding the corners. | Ensure the wrench or socket is the correct size (28mm) and in good condition to achieve optimal grip and prevent damage. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment, Marine and offshore structures, Electrical enclosures and assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||