This M15 x 13mm Nylon Hex Head Cap Screw offers exceptional strength and corrosion resistance. Engineered for demanding industrial environments, it provides a reliable fastening solution for critical assemblies.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M15 |
| Length | 13mm |
| Head Width | 19mm |
A proven choice for industrial professionals, this M15 x 13mm Hex Head Cap Screw is fabricated from high-performance nylon, ensuring superior dielectric strength, chemical inertness, and excellent resistance to environmental degradation. Its M15 nominal thread size, combined with a 13mm length and a robust 19mm head width, provides ample surface contact and torque transfer capability. This design makes it ideal for applications where non-conductivity, lightweight construction, or resistance to corrosive substances is paramount, offering a durable and dependable fastening solution.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with a tapped hole or nut for the M15 thread. 2. Insert the Hex Head Cap Screw into the desired location, ensuring proper alignment. 3. Tighten using a suitable wrench on the 19mm hex head until the required torque is achieved, avoiding over-tightening to prevent thread stripping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M15 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M15 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can lead to thread deformation or breakage. | Use a torque wrench and adhere to recommended torque specifications for nylon fasteners. |
| Using the screw in an application exceeding its temperature or chemical resistance limits. | Consult the nylon material specifications and verify compatibility with the operating environment. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Medical equipment assemblies, Corrosive chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||