This M15 x 120mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric properties. Engineered for demanding environments, it provides reliable fastening without electrical conductivity, ideal for chemical and electrical assemblies.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M15 |
| Length | 120mm |
| Head Width | 30mm |
Specified by design engineers worldwide, this M15 x 120mm Nylon Hex Head Cap Screw features a nominal thread diameter of 15mm and a length of 120mm. The hex head measures 30mm across flats, ensuring robust torque application with standard tooling. Fabricated from high-performance nylon, it exhibits excellent chemical resistance to a broad spectrum of solvents, acids, and bases, alongside superior electrical insulation characteristics. Its inherent non-magnetic nature and lightweight profile make it suitable for sensitive electronic equipment and environments where galvanic corrosion is a concern. The material's flexibility also allows for slight joint compliance, mitigating stress concentration.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate tooling for the M15 hex head. 2. Hand-thread the screw into the mating component to prevent cross-threading. 3. Tighten to the required torque specification, avoiding over-tightening which can damage the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M15 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M15 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to stripped threads or material deformation. | Utilize a torque wrench set to the recommended torque limit for nylon fasteners to prevent excessive stress. |
| Using incompatible cleaning solvents or chemicals that can degrade nylon over time. | Consult the nylon material's chemical resistance chart to ensure compatibility with the intended operating environment. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and switchgear assembly, Chemical processing equipment, Medical device manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||