Engineered for precision and durability, this M14x78mm Nylon Hex Head Cap Screw offers exceptional chemical resistance and electrical insulation. Ideal for lightweight, non-corrosive fastening solutions.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M14 |
| Length | 78mm |
| Head Width | 18mm |
Specified by design engineers worldwide, this M14x78mm Nylon Hex Head Cap Screw is manufactured from high-performance Nylon. It features a nominal diameter of M14, a length of 78mm, and a 18mm hex head width, ensuring robust engagement with standard tooling. The inherent properties of Nylon, including its excellent dielectric strength, low coefficient of friction, and resistance to a wide range of chemicals and solvents, make it suitable for applications where metal fasteners are prone to corrosion or electrical conductivity is undesirable. Its lightweight nature also contributes to overall system weight reduction.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M14 tool for the hex head. 2. Align the screw with the pre-drilled or tapped hole. 3. Thread the screw in smoothly by hand initially to avoid cross-threading. 4. Tighten using the M14 tool to the recommended torque specification for Nylon fasteners, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the Nylon screw, which can lead to thread stripping or material deformation. | Utilize a torque wrench and adhere to the manufacturer's recommended torque values for Nylon fasteners. A snug fit is often sufficient. |
| Using excessive force with an improperly sized tool, risking damage to the hex head. | Ensure the correct M14 size hex tool is used and that it fits snugly to prevent cam-out and damage. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment, Chemical processing and handling systems, Medical devices and instrumentation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||