This M14x77mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric properties. Its robust design ensures reliable fastening in harsh chemical and electrical applications where metal alternatives may fail.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M14 |
| Length | 77mm |
| Head Width | 32mm |
A high-performance industrial component, this M14x77mm Nylon Hex Head Cap Screw is engineered for applications demanding superior chemical inertness and electrical isolation. Constructed from high-grade nylon, it exhibits excellent resistance to a broad spectrum of acids, alkalis, and solvents, preventing galvanic corrosion and ensuring long-term integrity. The M14 thread size and 77mm length provide substantial engagement, while the 32mm head width ensures adequate surface area for torque application. Its non-conductive nature makes it ideal for use in sensitive electrical assemblies, control panels, and environments where arcing or short circuits are a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-tighten the cap screw to establish proper thread engagement. 3. Use an appropriate wrench or socket to achieve the specified torque, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or head deformation. | Consult torque specifications for nylon fasteners and use a torque wrench to ensure consistent and controlled tightening. |
| Using the screw in applications exceeding its temperature or load-bearing limits. | Verify the material's temperature range and tensile strength against application requirements before installation. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical Processing Equipment, Electrical Control Panels, Water Treatment Systems, Medical Device Assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||