This M14x66mm Hex Head Cap Screw, crafted from robust Aluminum 6061, offers a superior fastening solution. Its precise dimensions and lightweight nature make it ideal for demanding industrial applications where strength and corrosion resistance are paramount.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Size | M14 |
| Length | 66mm |
| Head Width | 25mm |
A high-performance industrial component, this M14x66mm Hex Head Cap Screw is engineered from Aluminum 6061, a material renowned for its excellent strength-to-weight ratio and superior corrosion resistance. The M14 nominal diameter ensures significant load-bearing capacity, complemented by a 66mm length for versatile assembly needs. The 25mm hex head width provides ample surface area for standard tooling engagement, allowing for secure installation and removal. Aluminum 6061's inherent properties make this fastener suitable for environments where galvanic corrosion is a concern and weight reduction is a critical design factor.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Hand-thread the screw to confirm alignment and prevent cross-threading. 3. Tighten using a calibrated torque wrench to the specified torque value for Aluminum 6061 fasteners, taking care not to overtighten.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force leading to thread stripping or fastener deformation. | Always use a calibrated torque wrench and adhere to recommended torque specifications for Aluminum 6061 fasteners. |
| Installing in a corrosive environment without considering additional protective measures. | While Aluminum 6061 offers good corrosion resistance, for extreme conditions, consider anodizing or alternative materials if prolonged exposure is anticipated. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace and Automotive assemblies, Lightweight structural components, Marine and outdoor equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||