This M14x60mm hex head cap screw, constructed from durable 304 stainless steel, offers superior corrosion resistance and mechanical strength for demanding fastening applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M14 |
| Length | 60mm |
| Head Width | 25mm |
Built to exacting engineering tolerances, this M14x60mm hex head cap screw features a nominal diameter of 14mm and a thread pitch of 2mm (coarse thread). The head is precisely machined to a width of 25mm, ensuring optimal torque transfer with standard M14 tooling. Composed of 304 stainless steel, it exhibits excellent resistance to a wide range of corrosive environments, including saltwater and various chemicals, due to its chromium and nickel content. This material also provides a high tensile strength, making it suitable for load-bearing assemblies and applications requiring long-term reliability and structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M14 wrench or socket for the hex head. 2. Ensure the mating threads are clean and free of debris. 3. Thread the cap screw into the receiving component, applying consistent torque until snug, then tighten to the required specification.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force which can strip threads or damage the fastener. | Apply torque gradually and use a torque wrench to achieve the specified tightening value. |
| Using incompatible tools that can round the hex head. | Employ correctly sized, high-quality sockets or wrenches designed for hex heads. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Marine hardware and shipbuilding, Chemical processing equipment, Outdoor structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||