Engineered for extreme environments, this M14x58mm Hex Head Cap Screw is precision manufactured from Aerospace Grade 5 Titanium. Offering unparalleled strength-to-weight ratio and exceptional corrosion resistance, it’s the definitive choice for critical fastening applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M14 |
| Length | 58mm |
| Head Width | 9mm |
A high-performance industrial component, this M14x58mm Hex Head Cap Screw is forged from Titanium Grade 5 (Ti-6Al-4V), a material renowned for its superior tensile strength, excellent fatigue resistance, and remarkable immunity to a wide spectrum of corrosive media, including saltwater and many chemicals. The M14 nominal diameter, coupled with a 58mm length and a 9mm hex head width, ensures compatibility with standard tooling and precise load distribution. This fastener is ideal for applications requiring minimal weight, maximum durability, and long-term operational integrity in aerospace, marine, chemical processing, and high-performance automotive sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris or damage. 2. Apply a suitable thread lubricant or anti-seize compound if recommended for the application environment. 3. Thread the cap screw by hand to prevent cross-threading. 4. Tighten the cap screw to the specified torque using a calibrated torque wrench, ensuring even pressure distribution and avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Cross-threading the fastener due to improper initial engagement. | Always start threading the screw by hand to confirm proper alignment before applying any tool. |
| Over-torquing the titanium screw, which can lead to thread stripping or material deformation. | Utilize a calibrated torque wrench and adhere strictly to the recommended torque specifications for the specific application and mating material. |
| Using incompatible lubricants or anti-seize compounds that can react with titanium. | Consult material compatibility charts and use only lubricants specifically designed for titanium fasteners. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and fittings, Chemical processing equipment, High-performance automotive assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||