Engineered for robust connections, this M14x41mm Hex Head Cap Screw features premium 304 stainless steel for superior corrosion resistance. Ideal for demanding industrial applications requiring reliable, long-lasting fastening.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M14 |
| Length | 41mm |
| Head Width | 27mm |
A high-performance industrial component, this M14x41mm Hex Head Cap Screw is manufactured from high-grade 304 stainless steel, offering excellent resistance to corrosion, oxidation, and a wide range of chemicals. Its M14 nominal diameter and 41mm length provide substantial thread engagement for secure assemblies. The substantial 27mm head width allows for high torque application with standard tooling, ensuring a strong and stable joint. The inherent strength and durability of 304 stainless steel make this fastener suitable for environments prone to moisture, saltwater, and corrosive agents, minimizing the risk of premature failure and extending service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate torque wrench and socket size. 2. Thread the cap screw into the pre-tapped hole or nut, ensuring smooth engagement. 3. Tighten to the specified torque value for the application, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect torque, leading to under-tightening or over-tightening. | Consult engineering drawings or fastening guides for the correct torque specification for this M14 screw and apply it consistently. |
| Cross-threading the screw during installation. | Start threading the screw by hand to ensure proper alignment before using a tool, and verify thread compatibility with the mating component. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Structural assembly in marine environments, Chemical processing equipment, Food and beverage machinery, Outdoor architectural fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||