High-strength M14x35mm Hex Head Cap Screw manufactured from aerospace-grade Titanium Grade 5. Offers exceptional corrosion resistance and a superior strength-to-weight ratio, ideal for critical fastening tasks.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M14 |
| Length | 35mm |
| Head Width | 28mm |
Engineered for reliability and performance, this M14x35mm Hex Head Cap Screw is precision machined from Titanium Grade 5 (Ti-6Al-4V). This alloy exhibits an excellent tensile strength of 895 MPa and yield strength of 827 MPa, while maintaining remarkable lightness and superior corrosion resistance in harsh environments. The 28mm head width ensures adequate torque transfer for secure assembly. Ideal for aerospace, marine, medical implants, and high-performance automotive applications where durability and weight savings are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply appropriate lubricant if required by the application. 3. Tighten the M14x35mm screw to the specified torque using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing Titanium fasteners. | Use a calibrated torque wrench and adhere to manufacturer-specified torque values to prevent thread damage or fastener failure. |
| Using standard steel tools that can gall or damage the Titanium threads. | Utilize tools made from hardened steel or carbide to prevent galling and ensure proper engagement with the hex head. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and fittings, Medical device implants, High-performance automotive assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||