Engineered from high-strength Aluminum 6061, this M14 x 35mm hex head cap screw provides exceptional corrosion resistance and a lightweight fastening solution for critical assemblies.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M14 |
| Length | 35mm |
| Head Width | 9mm |
Specified by design engineers worldwide, this M14 x 35mm hex head cap screw is manufactured from Aluminum 6061, offering an excellent balance of strength and corrosion resistance. Its yield strength of approximately 240 MPa and tensile strength around 270 MPa make it suitable for moderate load-bearing applications where weight is a critical factor. The 9mm head width ensures compatibility with standard tooling for secure installation. This alloy's inherent resistance to atmospheric and seawater corrosion makes it a preferred choice in marine, aerospace, and outdoor environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-thread the screw to verify alignment and prevent cross-threading. 3. Tighten to the specified torque value using an appropriate wrench, taking care not to overtighten.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the aluminum screw, leading to thread stripping or deformation. | Always use a torque wrench and adhere to the recommended torque specifications for Aluminum 6061 fasteners to prevent damage. |
| Using in applications requiring high tensile or shear strength beyond Aluminum 6061's capabilities. | Confirm the material's mechanical properties are sufficient for the intended load requirements; consult engineering documentation for alternative alloys if necessary. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine hardware and fittings, Lightweight automotive assemblies, Corrosion-resistant enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||