These M14x17mm Hex Head Cap Screws are precision-machined from high-strength Aluminum 6061. Offering excellent corrosion resistance and a favorable strength-to-weight ratio, they are ideal for critical fastening applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Size | M14 |
| Length | 17mm |
| Head Width | 26mm |
Specified by design engineers worldwide, these M14x17mm Hex Head Cap Screws are manufactured from Aluminum 6061, a widely utilized alloy known for its excellent corrosion resistance, moderate to high strength, and good weldability. The nominal thread size is M14, with an overall length of 17mm. The hex head offers a substantial bearing surface with a width of 26mm, facilitating secure torque application with standard tools. This combination of material and geometry makes them suitable for environments where weight reduction and resistance to environmental degradation are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Insert the M14x17mm Hex Head Cap Screw into the assembly. 3. Torque to the manufacturer's recommended specification for Aluminum 6061 fasteners, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing Aluminum 6061 screws | Use a calibrated torque wrench and adhere to the recommended torque values for Aluminum 6061 to prevent thread stripping or head deformation. |
| Using standard steel torque specifications | Aluminum 6061 has lower tensile strength than steel; always consult torque charts specific to aluminum fasteners. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine equipment and fittings, Lightweight automotive assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||