This M14x144mm brass hex head cap screw offers exceptional corrosion resistance and moderate strength. Ideal for applications requiring non-magnetic properties and good electrical conductivity.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M14 |
| Length | 144mm |
| Head Width | 24mm |
A high-performance industrial component, this M14x144mm brass hex head cap screw is manufactured to precise tolerances. Featuring a nominal diameter of M14 and a length of 144mm, its substantial head width of 24mm ensures robust torque application and secure fastening. Brass alloy provides excellent resistance to galvanic corrosion, making it suitable for marine, chemical processing, and electrical applications where traditional steel fasteners may degrade. Its inherent non-magnetic properties are critical in sensitive electronic or scientific instrumentation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the tapped hole or nut is clean and free of debris. 2. Insert the hex head cap screw, hand-tightening initially to verify thread engagement. 3. Using an appropriate size wrench or socket, tighten the screw to the recommended torque specification for brass fasteners, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening brass screws, which can lead to thread stripping or deformation. | Adhere to recommended torque values for brass fasteners and use a torque wrench for accuracy. |
| Using the wrong tool size for the hex head, potentially damaging the head or slipping. | Always use a correctly sized hex wrench or socket that fits snugly to ensure proper engagement and prevent damage. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical connectors and switchgear, Chemical processing equipment, Artistic and decorative installations, Food processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||