Engineered from aerospace-grade Titanium Grade 5, this M14x124mm hex head cap screw offers exceptional strength, low weight, and superior corrosion resistance for critical structural and mechanical assemblies.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M14 |
| Length | 124mm |
| Head Width | 23mm |
Built to exacting engineering tolerances, this M14x124mm hex head cap screw is forged from Titanium Grade 5 (Ti-6Al-4V), ensuring a minimum tensile strength of 950 MPa and a yield strength of 880 MPa. Its lightweight nature (approximately 40% lighter than steel equivalents) makes it ideal for weight-sensitive systems. The inherent passivation layer provides unparalleled resistance to a wide range of corrosive environments, including saltwater, chemicals, and high temperatures. With a head width of 23mm, it is designed for use with standard M14 tooling, facilitating robust assembly in aerospace, marine, medical, and high-performance automotive sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply appropriate lubricant or anti-seize compound if required by the application and operating environment. 3. Engage the screw by hand to prevent cross-threading, then tighten to the manufacturer's specified torque using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, which can strip threads or compromise the screw's structural integrity. | Always adhere to specified torque values using a calibrated torque wrench. |
| Using incompatible lubricants or anti-seize compounds that can react with titanium. | Consult the application engineering guidelines or material compatibility charts for approved lubricants and anti-seize compounds. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and fixtures, High-performance automotive assemblies, Medical implants and instrumentation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||