Engineered for ultimate performance, this M14x123mm Hex Head Cap Screw from Titanium Grade 5 offers exceptional strength-to-weight ratio and unparalleled corrosion resistance for critical assemblies.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Size | M14 |
| Length | 123mm |
| Head Width | 8mm |
Purpose-built for heavy-duty applications, this M14x123mm hex head cap screw is manufactured from premium Titanium Grade 5 (Ti-6Al-4V), ensuring superior tensile strength, fatigue resistance, and excellent performance in extreme environments, including high temperatures and corrosive media. The M14 thread provides robust engagement, while the 123mm length offers ample reach for varied joint designs. Its inherent lightweight properties make it ideal for aerospace, marine, and demanding industrial applications where performance and durability are paramount. The 8mm head width ensures compatibility with standard tooling, facilitating efficient assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply a suitable lubricant or anti-seize compound if recommended for the specific application. 3. Thread the cap screw into the pre-tapped hole or nut until finger-tight. 4. Using a calibrated torque wrench, tighten the screw to the specified torque value for the M14 size and Titanium Grade 5 material, adhering to industry standards or design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, leading to thread stripping or fastener fracture. | Always use a calibrated torque wrench and adhere to specified torque values for Titanium Grade 5 fasteners. |
| Using incompatible lubricants or anti-seize compounds, which can cause galling or hydrogen embrittlement. | Consult material compatibility charts or the fastener manufacturer for approved lubricants or anti-seize solutions specific to Titanium Grade 5. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine and offshore equipment, High-performance automotive assemblies, Medical implants and instrumentation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||