This M14x104mm hex head cap screw is a robust fastening solution crafted from high-grade carbon steel. Engineered for superior strength and reliability in demanding industrial environments, it ensures secure and long-lasting connections.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Size | M14 |
| Length | 104mm |
| Head Width | 16mm |
A high-performance industrial component, this M14x104mm hex head cap screw is manufactured from premium carbon steel, offering excellent tensile strength and durability. Its metric thread size of M14, combined with a precise 104mm length, ensures deep and secure engagement in mating components. The 16mm hex head width provides ample surface area for high torque application with standard tooling, facilitating efficient assembly and disassembly. This material composition and dimensional accuracy make it suitable for critical structural and mechanical assemblies where load-bearing capacity and resistance to stress are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Align the screw with the tapped hole or nut, engaging the threads smoothly. 3. Tighten the screw to the specified torque using an appropriate wrench, ensuring a secure fit without over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench, leading to stripped hex head. | Always use a correctly sized wrench that fits snugly on the hex head. |
| Cross-threading the screw by forcing it into the mating component. | Start threading the screw by hand to confirm proper alignment before applying any torque. |
| Over-tightening, which can damage threads or the screw itself. | Consult engineering drawings or torque charts for the recommended tightening torque. |
A: This Hex Head Cap Screw, Carbon Steel is manufactured from Carbon Steel.
A: Heavy machinery assembly, Structural steel connections, Automotive chassis components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||