Engineered for reliability, this M14 x 99mm Nylon Hex Head Cap Screw offers exceptional chemical resistance and electrical insulation. Its robust nylon construction ensures secure fastening in corrosive or electrically sensitive environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M14 |
| Length | 99mm |
| Head Width | 21mm |
Built to exacting engineering tolerances, this M14 x 99mm Hex Head Cap Screw features a nominal diameter of M14 and a total length of 99mm. The hex head boasts a measured width of 21mm, ensuring compatibility with standard hex wrenches. Constructed from high-performance nylon, this fastener exhibits excellent tensile strength for its class, superior corrosion resistance against a wide array of chemicals and solvents, and inherent dielectric properties, making it ideal for applications where electrical conductivity is undesirable or hazardous. Its self-lubricating qualities also facilitate easier assembly and disassembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-tighten the screw to engage the threads properly. 3. Use a calibrated hex wrench to tighten the screw to the specified torque, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force, leading to thread stripping or material deformation. | Always adhere to recommended torque specifications for nylon fasteners and use a torque wrench for accuracy. |
| Cross-threading the screw during installation. | Start threading by hand to confirm alignment before applying any tool torque. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment, Electrical enclosures and control panels, Medical device assembly, Water treatment systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||