Engineered for exceptional performance, this M14 x 92mm Hex Head Cap Screw in Aluminum 6061 offers superior corrosion resistance and a high strength-to-weight ratio, ideal for critical structural assemblies.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Size | M14 |
| Length | 92mm |
| Head Width | 33mm |
Purpose-built for heavy-duty applications, this M14 x 92mm Hex Head Cap Screw is manufactured from Aerospace Grade Aluminum 6061, offering excellent corrosion resistance and a minimum tensile strength of 310 MPa. Its robust design, featuring a 33mm head width for superior torque transfer and reduced stress concentration, makes it ideal for applications demanding both strength and lightweight construction. The M14 thread pitch ensures secure and reliable fastening in structural components, marine hardware, and demanding industrial machinery where material integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Hand-thread the screw to start, verifying proper thread engagement. 3. Tighten to the recommended torque specification using a calibrated torque wrench, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force, leading to thread stripping or material fatigue. | Always consult and adhere to the manufacturer's recommended torque specifications for Aluminum 6061 fasteners. |
| Mating with incompatible thread types or damaged receiving threads. | Verify that the mating component's thread is a standard M14 metric thread and inspect for any damage before installation. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Marine Hardware and Structures, Aerospace Component Assembly, Industrial Machinery and Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||