Engineered from durable Nylon, these M14 x 85mm Hex Head Cap Screws offer excellent corrosion resistance and lightweight construction. Ideal for applications requiring non-conductive and chemical-resistant fastening solutions.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M14 |
| Length | 85mm |
| Head Width | 10mm |
Trusted by engineers across multiple sectors, these M14 x 85mm Nylon Hex Head Cap Screws feature a standard M14 thread and an 85mm length, with a nominal head width of 10mm. Fabricated from high-performance nylon, they provide exceptional dielectric strength, chemical inertness against many solvents and acids, and a wide operating temperature range. Their low coefficient of friction and inherent flexibility make them suitable for vibration-dampening applications and environments where metal fasteners would corrode or interfere with electrical components. These are often specified for automotive, electrical, and chemical processing industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-thread the M14 Nylon Hex Head Cap Screw into the receiving component to avoid cross-threading. 3. Tighten with an appropriate wrench or socket to the desired torque, being mindful of nylon's lower tensile strength compared to metal fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing the nylon screw, leading to stripping or breakage. | Utilize a torque wrench set to the manufacturer's recommended specification for nylon fasteners of this size and material. |
| Using metal washers directly against the nylon head, potentially causing deformation under load. | Employ nylon or nylon-coated washers to distribute load evenly and prevent damage to the screw head. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation and grounding systems, Corrosive chemical handling equipment, Lightweight automotive assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||