Engineered from aerospace-grade Titanium Grade 5, this M14 x 58mm hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance for demanding applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Size | M14 |
| Length | 58mm |
| Head Width | 9mm |
Built to exacting engineering tolerances, this M14 x 58mm hex head cap screw is manufactured from Titanium Grade 5 (Ti-6Al-4V). This alloy provides a remarkable combination of high tensile strength (950 MPa minimum), excellent fatigue strength, and outstanding corrosion resistance in various aggressive environments, including saltwater and chemical exposure. The 9mm head width ensures compatibility with standard M14 tooling, allowing for controlled torque application. Its low density (4.43 g/cm³) makes it ideal for weight-sensitive assemblies in aerospace, marine, and high-performance automotive sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the threaded hole and the screw threads to ensure a smooth engagement. 2. Apply a suitable thread lubricant or anti-seize compound if recommended for the specific application environment. 3. Insert the screw by hand until it seats, then use an appropriate wrench or torque wrench to tighten to the specified torque value.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, which can lead to thread stripping or fastener failure. | Always use a calibrated torque wrench and adhere to the recommended torque specifications for Titanium Grade 5 fasteners. |
| Using incompatible tools, potentially damaging the hex head. | Ensure the wrench or socket used precisely fits the 9mm head width of the cap screw. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine hardware and subsea equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||