This M14 x 53mm Nylon Hex Head Cap Screw offers excellent corrosion resistance and lightweight properties, ideal for specialized industrial applications where traditional metal fasteners may fail or be unsuitable.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M14 |
| Length | 53mm |
| Head Width | 22mm |
Designed for demanding industrial environments, this M14 x 53mm Hex Head Cap Screw is manufactured from high-strength, engineering-grade nylon. Its robust construction provides excellent resistance to chemicals, moisture, and corrosion, making it suitable for wet or corrosive atmospheres. The M14 thread size ensures a secure connection, while the 53mm length offers ample engagement. The 22mm head width provides sufficient surface area for torque application with standard hex drivers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-thread the nylon hex head cap screw into the receiving component until snug. 3. Using a suitable hex wrench, tighten the screw to the recommended torque specification for nylon fasteners. Avoid overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, which can strip threads or deform the head. | Always use a torque wrench and adhere to the manufacturer's recommended torque values for nylon fasteners. Hand-tightening followed by a quarter-turn is often sufficient. |
| Using the nylon screw in applications exceeding its temperature or load-bearing capabilities. | Verify that the application environment and expected loads are within the specified operational limits of nylon fasteners. Consult material datasheets for precise environmental and mechanical resistance. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Marine and offshore equipment, Chemical processing and laboratory equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||