This M14 x 38mm hex head cap screw, crafted from robust 304 stainless steel, offers superior corrosion resistance and exceptional tensile strength for critical fastening needs.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Size | M14 |
| Length | 38mm |
| Head Width | 29mm |
A high-performance industrial component, this M14 x 38mm hex head cap screw is engineered for demanding environments. Constructed from premium 304 stainless steel, it provides excellent resistance to corrosion, oxidation, and a wide range of chemicals, making it ideal for marine, food processing, and outdoor applications. The M14 thread size ensures significant load-bearing capacity, while the 38mm length offers versatile reach. The substantial 29mm head width provides ample surface area for torque application via standard wrenches or socket drivers, ensuring secure and reliable fastening. Its inherent durability guarantees longevity even under extreme stress and environmental exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate torque setting based on application requirements and material being fastened. 2. Thread the M14 hex head cap screw into the pre-tapped hole or mating fastener until snug. 3. Apply final torque using a calibrated torque wrench to achieve the specified tension without over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard steel fastener in a corrosive environment. | Always specify 304 stainless steel or higher for environments prone to rust or chemical attack. |
| Over-tightening the screw, leading to thread stripping or fastener failure. | Utilize a calibrated torque wrench and consult engineering specifications for correct torque values. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Structural steel connections, Machinery and equipment assembly, Marine hardware and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||