Engineered for superior corrosion resistance and mechanical strength, this M14 x 35mm hex head cap screw is forged from premium 316 stainless steel. Ideal for critical fastening applications where durability is paramount.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Size | M14 |
| Length | 35mm |
| Head Width | 31mm |
A high-performance industrial component, this M14 x 35mm hex head cap screw is manufactured from marine-grade 316 stainless steel, renowned for its exceptional resistance to pitting and crevice corrosion, even in aggressive chemical and saltwater environments. The M14 thread provides robust load-bearing capacity, suitable for high-stress assemblies. With a nominal diameter of 14mm and a grip length of 35mm, it offers secure and reliable fastening. The substantial 31mm head width ensures adequate torque application and distributes load effectively across the mating surface, minimizing the risk of material deformation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket for the M14 hex head. 2. Ensure the mating threads are clean and free of debris. 3. Thread the cap screw into the receiving component by hand to confirm proper alignment and avoid cross-threading. 4. Tighten the cap screw to the specified torque using a calibrated torque wrench, following established engineering guidelines for the specific application and materials being joined.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard carbon steel fastener in a corrosive environment. | Always specify and use 316 stainless steel or a comparable corrosion-resistant alloy for applications exposed to moisture, chemicals, or saltwater. |
| Over-tightening the fastener, leading to thread stripping or material deformation. | Utilize a calibrated torque wrench and consult engineering specifications for the correct torque value for M14 fasteners in the intended application. |
| Cross-threading the fastener during installation. | Begin threading by hand to ensure proper alignment before applying any torque, especially when working with metric threads. |
A: This Hex Head Cap Screw, 316 Stainless Steel is manufactured from 316 Stainless Steel.
A: Marine and offshore equipment assembly, Chemical processing plants, Food and beverage processing machinery, Outdoor structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||